Process för att göra pussel

There are various ways of cutting the joint lines of the puzzle pieces. Mainstream puzzles use a zero-piece edge style called "fully interlocking". "Comprehensive interlocking" is to connect several adjacent pieces together. If one of them is moved horizontally, all the connected pieces will slide in the same direction and will not be separated. Sometimes, the pieces are so tightly assembled that the whole piece will not fall apart when picked up.

Närbild- av sammanfogningen av pusselbitar

The interlocking of the pieces is usually achieved by the protrusions and depressions on the edges of the pieces, and this splicing method is similar to the "tenon and mortise joint" in furniture production. The main body of the piece is a rectangle with the same size and form. Assuming that the two pieces that are closely connected to the left and right are respectively A and B, if the right edge of piece A has a protrusion A extending to the right, then the left edge of piece B must have a shape similar to that of piece B. A matches the depression B, and in order to make A and B lock each other, the end of the protrusion A is required to be wider than the end connected to the edge of the nail plate. This kind of protrusion in the form of a wide front and a narrow back is called a dovetail in traditional woodworking. We might as well call the protrusions and depressions of the puzzle pieces "tenons" and "eyes". However, if the dovetail tenon with the tip is made on the cardboard, it is easy to layer and damage the parts, so the tenon and the mortise in the puzzle are mostly round.

In some jigsaw puzzles (probably the most common one), all the pieces have the same shape, each piece has two mortise and tenon which are axially symmetrical, and the axes of the tenon and mortise are crossed.卄" glyph. In this way, zero slices and zero slices are always criss-crossed. In some puzzles, the tenon and tenon structure of each piece is different from each other, but usually the main body of each piece is also quadrilateral, with a tenon or mortise on each of the four sides.

Non-interlocking puzzles are generally divided into pieces by intersecting curves of various forms, and the edge of the piece is also a section of the curve. In fact, the puzzle of this mode is relatively simple, because the matching between zero pieces and zero pieces is mostly fixed, and it is easy to find adjacent zero pieces according to the curve shape of the edge. It's just that players are required to be calm when assembling such a puzzle, otherwise it is easy to mess up the part that has been assembled if they miss.

Sammankopplade pussel med noll bitar av samma form anses vara de svåraste att montera, särskilt de med mjukare färger och mindre mönsterkontrast, eftersom det ofta bara finns mycket subtila skillnader mellan bitarna.

Ibland kommer det att finnas några pussel med väldigt konstiga layouter, som kan ge spelarna roligare.

Den övergripande bilden av pusslet är den vanligaste, och bildens kant är antingen en rak linje eller en vanlig dekorativ kurva. I den här typen av pussel finns det alltid några bitar som antingen saknar tapp och tapp på ena sidan, eller har en rät vinkel. Spelare kan enkelt placera ut ramen, så de börjar ofta från hörnen vid montering. Naturligtvis finns det också några pussel som medvetet gör hörnbitarna till en tapp för att göra spelet mer utmanande. Det finns också några mer barnsliga idéer, som gör konturerna av hela pusslet till små djur eller andra söta former. Eftersom konturlinjerna är mer slingrande och långa finns det många fler bitar på kanten än fyrkantiga pussel, och det är lättare att lägga ihop. Den här typen av pussel är givetvis mer lämpad för unga spelare.

Under de senaste åren har dator- och datorstyrd-laser- och hydraulisk skärutrustning också använts vid design och tillverkning av pussel. Tillämpningen av ny teknik har gjort pusslens sammankopplingsmekanism och delstilar mer sofistikerade, och nya mönster dyker upp en efter en.